IB IL AI 4/EF-2MBD-PAC

https://www.phoenixcontact.com/us/products/2878641 Inline terminal - IB IL AI 4/EF-2MBD-PAC - 2878641 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Inline analog input terminal with differential input channels, complete with accessories (connector and labeling field), 2 Mbaud, 4 inputs, 0-20 mA, 4-20 mA, ±20 mA, 0-10 V, ±10 V, 0-5 V, ±5 V, 2, 3 or 4-conductor connection method Product Features  Bus-synchronous provision of input values with very low jitter (< 10 μs)  Measured value acquisition with 16-bit resolution  4 differential signal inputs  Connection of sensors in 2, 3, and 4-wire technology  Current ranges: 0 mA ... 20 mA, 4 mA ... 20 mA, ±20 mA  Voltage ranges: 0 V ... 10 V, ±10 V, 0 V ... 5 V, ±5 V  Short-circuit  Diagnostic and status indicators   Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 200.0 GRM Custom tariff number 85389091 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 48.8 mm Height 136.8 mm Depth 71.5 mm 10/10/2014   Page 1 / 6 https://www.phoenixcontact.com/us/products/2878641 Inline terminal - IB IL AI 4/EF-2MBD-PAC - 2878641 Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C Ambient temperature (storage/transport) -25 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (according to DIN EN 61131-2) Permissible humidity (storage/transport) 10 % ... 95 % (according to DIN EN 61131-2) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 General Weight 210 g Note on weight specifications with connectors Mounting type DIN rail Protection class III, IEC 61140, EN 61140, VDE 0140-1 Test section 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min 5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min 7.5 V supply (bus logic), 24 V supply UANA / I/O 500 V AC 50 Hz 1 min 7.5 V supply (bus logic), 24 V supply UANA/functional earth ground 500 V AC 50 Hz 1 min I/O / functional earth ground 500 V AC 50 Hz 1 min Interfaces Designation Inline local bus Connection method Inline data jumper Transmission speed 2 MBit/s Transmission physics Copper Inline potentials Communications power UL 7.5 V DC (via voltage jumper) Current consumption from UL max. 125 mA typ. 110 mA Current consumption from UM max. 200 mA I/O supply voltage UANA 24 V DC Current consumption from UANA max. 20 mA typ. 13 mA Analog inputs Number of inputs max. 4 (Differential inputs, voltage or current can be chosen separately) Connection method Inline shield connector 10/10/2014   Page 2 / 6 https://www.phoenixcontact.com/us/products/2878641 Inline terminal - IB IL AI 4/EF-2MBD-PAC - 2878641 Technical data Analog inputs 2, 3-conductor Input name Analog inputs Data formats IL, IB ST, standardized display, S7 compatible Current input signal 0 mA ... 20 mA 4 mA ... 20 mA -20 mA ... 20 mA Voltage input signal 0 V ... 5 V -5 V ... 5 V 0 V ... 10 V -10 V ... 10 V Number of inputs 4 (differential inputs, voltage) Voltage input signal 0 V ... 5 V -5 V ... 5 V 0 V ... 10 V -10 V ... 10 V Input resistance of voltage input 300 kΩ Number of inputs 4 (differential inputs, current) Current input signal 0 mA ... 20 mA 4 mA ... 20 mA -20 mA ... 20 mA Input resistance current input approx. 110 Ω Classifications eCl@ss eCl@ss 4.0 27250303 eCl@ss 4.1 27250303 eCl@ss 5.0 27250303 eCl@ss 5.1 27242601 eCl@ss 6.0 27242601 eCl@ss 7.0 27242601 eCl@ss 8.0 27242601 ETIM ETIM 2.0 EC001431 ETIM 3.0 EC001596 ETIM 4.0 EC001596 10/10/2014   Page 3 / 6 https://www.phoenixcontact.com/us/products/2878641 Inline terminal - IB IL AI 4/EF-2MBD-PAC - 2878641 Classifications ETIM ETIM 5.0 EC001596 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 43201404 Approvals Approvals Approvals UL Recognized / cUL Recognized / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized  cUL Recognized  cULus Recognized  Accessories Accessories 10/10/2014   Page 4 / 6 https://www.phoenixcontact.com/us/products/2878641 Inline terminal - IB IL AI 4/EF-2MBD-PAC - 2878641 Accessories Labeling panel Labeling field - IB IL FIELD 8 - 2727515 Labeling field, width: 48.8 mm     Labeling field - IB IL FIELD 2 - 2727501 Labeling field, width: 12.2 mm     Plug Inline shield connector - IB IL SCN-6 SHIELD - 2726353 Inline shield connector     Terminal marking Insert strip - ESL 62X46 - 0809502 Insert strip, Sheet, white, unlabeled, can be labeled with: Office printing systems, Plotter: Laser printer, Mounting type: Insert, Lettering field: 62 x 46 mm     10/10/2014   Page 5 / 6 https://www.phoenixcontact.com/us/products/2878641 Inline terminal - IB IL AI 4/EF-2MBD-PAC - 2878641 Accessories Insert strip - ESL 62X10 - 0809492 Insert strip, Sheet, white, unlabeled, can be labeled with: Office printing systems, Plotter: Laser printer, Mounting type: Insert, Lettering field: 62 x 10 mm     Drawings Connection diagram Slot Channel 1 1 2 2 3 3 Dimensioned drawing 4 4 136,8 Current sensor at channel 4 71,5 I1+ I1+24V U1+ U1- Voltage sensor at channel 1 +24V 119,8 Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/10/2014   Page 6 / 6